• Salon door type catches on stateroom doors
• Interior doors stile & rail
• Polished nickel hardware throughout
• Polished nickel cover plates for switches & receptacles throughout
• Polished nickel interior light trim throughout
• Custom headliner material throughout - two-tone Moccasin White
• Sofa, upgraded dewberry style in Ultraleather Manila
• Custom wallpaper material and installation
• Helm and companion chairs in Ultraleather Buckskin
• Bridge cushions in Ultraleather Buckskin
• Mezzanine cushions in Ultraleather Buckskin
• Barstools without back
• Walnut satin finish throughout

• High gloss walnut cocktail table
• Wood on aft side of galley island
• Clear icemaker
• Dimmers for quartz lights
• Salon door with electric door opener
• Custom amtico flooring at salon entranceway, fumed oak
• Electric panel up
• Wood wire boxes
• Crown molding in salon, galley, & dinette
• Storage above dinette
• Wood toe kick to companionway stairs
• Switch in salon for all hardtop & tower lights
• Custom L-Shaped dinette with divider wall between sofa and dinette in place of end table
• Wood strips in salon headliner

• Undercounter refrigerator & freezer with drawers
• Additional undercounter refrigerator with drawers
• Four-burner Miele surface mount range
• 110v outlet next to switch on bottom of upper cabinet above sink
• Custom countertop, Bianco amtico with ¼ beveled edge
• Stainless steel sink undermount
• Custom amtico flooring, fumed oak
• Satin nickel faucet
• Dimmer on overhead led lights
• Mirror backsplash
• High gloss wood table with wood pedestal
• Pullout trash bin
• Cabinet lights
• Bar stools without backs, Ultraleather Manila
• Bianco Amtico countertop with ¼ beveled edge

• Vertical wood strips between wall panels in companionway

• Wood end table tops
• Mattress Viking slumber #8
• 32" flat panel TV
• Additional telephone outlet
• FusionCD/DVD stereo with bluetooth capability
• Dimmer on overhead led lights
• Custom: crown molding
• Owner's safe in closet
• Sconces

• Wood face on lower vanity
• Custom amtico flooring, fumed oak
• Satin nickel shower fixtures
• Brushed nickel towel bars & rings
• Satin nickel faucet
• One piece custom frameless glass shower door
• Vanity top
• Biano Amtico with ¼ beveled edge

• Centerline queen berth
• Mattress Viking Slumber 6
• 32" Flat panel TV
• Crown molding
• Dimmers in overhead lights

• Custom amtico flooring, fumed oak
• Satin nickel shower fixtures
• Brushed nickel towel bars and rings
• Satin nickel faucet
• Wood face on lower vanity
• Granite vanity top, Bianco Amtico with ¼ beveled edge

• Mattress Viking slumber #6
• Dimmers on overhead LED lights
• 22" Flat screen TV

• 22" Flat screen TV
• Dimmer on overhead LED lights
• Mattress Viking slumber #6
• Wood locker storage top
• Fusion CD/DVD stereo with bluetooth capability

•  Custom Amtico flooring, Fumed oak
• Satin nickel shower fixtures
• Brushed nickel towel bars & rings
• Satin nickel faucet
• Wood face on lower vanity
• Corian vanity countertop with bone sink
• Granite vanity top, Bianco Amtico with ¼ beveled edge

• Refrigerated cockpit step box
• Crushed ice machine
• Transom coaming and fish box
• Mezzanine
• Freezer storage in mezzanine seat
• Storage lockers under port and starboard coamings
• Plumb transom box as live well without window and light
• Split lid for cockpit fish box
• Tri color lights in aft deck overhang
• Tri color rope lights under coaming
• Cruisair "cool breeze" mezzanine air system
• Refrigerate port mezzanine undermounted step box
• Refrigerate starboard mezzanine undermounted step box
• (2) 24v Outlets forward under coaming, one on each side
• Fittings & plumbing for on-deck live well
• Freezer bait trays
• Release marine rod holders
• Ball valve on transom box to pressurize box while running
• Threaded cockpit scuppers
• Additional freshwater outlet on port side for a total of (2)
• Teak cockpit sole, mezzanine, & ladder treads
• 12vdc 30 amp outlet forward under coaming for teaser reels
• White Stamode forward mask cover
• Fusion MS-NRX2001 stereo
• JL audio speakers
• JL audio subwoofer
• JL audio amplifier
•  

• Recessed electronics boxes
• Bridge freezer box
• Removable flybridge jumpseat backrest
• Refrigerate bridge drink box
• Fresh water outlet on bridge
• Buell air horns
• Powder coated grab rail on top of helm, starboard side
• Handrail on side of helm console above helm access door
• Custom: compass in recessed electronics box
• Custom: recesses in fiberglass for finger pulls for acrylic lid
• Custom: jumpseat backrest 4-5" higher
• MTU trolling valves
• Electronic single lever controls for helm pod with bow thruster controls
• Release teak helm pod
• Stainless steel gas springs on bench seats
• Dedicated forward feed for tower with labeled shutoff valve in forward flybridge locker
• Watermaker control panel
• FB cushions ultraleather

• Furuno Navnet 3D 25 kw 96mile radar with 6' array
• (3) KEP 17" LED glass bridge displays
• Garmin GPS MAP 8208 8" MFD
• Garmin 6XM52 Weather receiver
• Garmin AIS-600 AIS Transponder
• Furuno FCV 1900 Sounder
• Furuno 2kw 50 Hz Transducer
• Furuno 2kw 200 KHz Transducer
• Garmin GSD-26 Chirp Video Sounder
• Garmin GHP Reactor Autopilot
• (2) Garmin IC-M604 VHF Radios
• Furuno RD33 Data Organizer with temp and depth
• Fusion MS-UD750 Marine stereo with Bluetooth and docking station
• (3) Gost PM Mini IR Ball Cameras located in engine room port, center, starboard
• FLIR M625L Therm/low light camera

• Tuna Tower with Molded Top 62' Convertible 8' Gap, Brushed Pipe (2) Antenna, Stands-offs
• (6) Hardtop lights Lumitec Mirage Tri-Color w/ Fiberglass recess (red, white, and blue)
• Radar Pod Large Oval Style, with Sliding Door for Teaser Reels
• Molded Standing Platform with Coupler Box on Platform
• Molded 3 in 1 24V-LED Light Pod with stainless steel Bezel
• Molded 24V-LED Light Forward Platform stainless steel Bezel
• Control Box 63" with flush mounted compass
• Recessed Electronics box with lid
• Top of control box painted satin black
• Tower Sunshade Molded w/Internal Tracks, 5 Welded Antenna Mounts
• Painted tower Sunshade frame Satin Black
• (8) Rod Holder Polished Weld to Rail PBT Style
• (6) Rod Holder Polished Aft Legs 3-P-3-S PBT Style
• Controls & Steering, MTU Blue Vision System
• U Shaped Safety Rail around Ladder Opening
• 43' Outrigger Rupp Bigg Riggs, HD 3 Spreader, Bridge Release Large Solid Aft Bar Installed
• Rigger Locks
• Rupp Center Rigger
• (2) Recessed Electric Teaser Reels MIYA EPOCH US9 HD Heavy Duty 24V
• Wash down Water in Tower
• Flag Staff Aft
• Electronics Box Electric Fold Down
• Bench Seat with backrest
• Enclosure 3 sided Track to Track to Edge Jump Seat Backrest, EZ2CY
• (3) Air Vents Forward Top Panels
• Powder coated Aluminum Flangeless Track
• Weld flag staff each side platform perimeter rail
• (2) Lumitec Mirage Tri-Color LED Lights w/ fiberglass recess in sunshade top (Red, White, and Blue)
• (2) Lumitec Mirage Tri-Color LED Lights under platform w/ fiberglass recess (Red, White, and Blue)
• Hardtop, Platform, tower sunshade fabricated using carbon fiber

• Garmin GPS Map 8212 8" MFD
• ICOM HM-162 VHF Command Mic

• Awlgrip forward bilge and anchor locker
• Magnetic switches for all bilge lights

• Twin MTU 12V2000 M96L main engines
• MTU extended warranty until 3/14/28 or 5,200 Hours
• Seakeeper SK26
• Upgrade transformer to voltage stabilizer for 2nd electrical inlet
• Backup pump for seawater system plumbed in parallel
• Fuel priming pumps 24v
• Onan 21.5kw Generator
• Additional Onan 21.5kw generator
• 1400 gpd watermaker with auto backflush
• Back-up fuel transfer pump in parallel
• Two tool box in engine room 4 drawer 12" wide painted white
• Willy vac in place of engine room cleanout bilge pump
• Spot zero
• Tee in dockside water manifold to fill water tank from cp
• Additional Octoplex in engine room
• Switch in entrance for fighting chair lights

• Additional fuel tank forward (3) total tanks
• Seakeeper gyro SK26
• Custom non-metallic boot stripe
• Haze grey hull color
• Faux teak toe rail with clear coat
• Faux teak transom with clear coat
• Bow thruster

• Fresh water washdown at bow inside anchor locker
• Anchor bracket in anchor locker
• Bow cleats fore and aft
• Led lights in anchor locker
• Salon forward window mask with cover

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing.

X