Catalina 445 2012 "Fresh Aire"

• Replaced forward AC Unit & controller
• Replaced prop shaft nut/anode cage & anode
• Obtained out of water insurance survey report
• Replaced galley sink faucet
• Refurbished fore & aft heads (replaced base assembly & sanitary tubing)
• Replaced aft AC Unit & controller
• Replaced boat 'tent' sun shade
• Refurbished propane grill

Replaced TV antenna atop mast

Replaced ac raw water strainer

Replaced Rodkicker gas spring

Replaced forward berth mattress a second time with custom latex mattress

Replaced Controller for refrigerator

Engine & Genset Maintenance

Replaced prop shaft packing gland

Replaced AC Raw water pump and AC water lines (increased pump size to appropriate volume)

Added 50-ft Shore Power Cables

Added (2) 50A - 30A Y-splitter units

• Bottom job
• Repaired rudder bearings
• Added fender covers
• Replaced inverter
• Restitched bimini seams
• Replaced galley sink faucet
• Added Clozures™ large window shades in Salon
• Replaced all (3) 12-volt fans

• Replaced 32-inch TV with 40-inch 4K Vizio V405-G9
• Replaced cd/dvd player with Autopro Bluray BD 1208
• Replaced stereo receiver with Fusion Apollo RA770
• Replaced main sail and genoa with Banks sails - no batten main and 139% genoa
• Replaced shower sump bilge pump
• Added cockpit seat pads
• Added Clozures™ window shades on all portlights
• Replaced forward berth mattress and bedding
• Changed forward head to freshwater feed
• Tuned standing rigging & replaced deck light
• Replaced Propane Grill

Bimini and Screens

• Windshield with cover
• Side windshields from front to the main winch
• Side sunscreens
• Rear sunscreen
• Grab handles outboard of windshield
• Custom cushions for rear jump seats
• Top center screen for Bimini
• Ventilation screen for companionway

Instruments and Controls

• Relocated chart plotter to improve visibility and access
• Added removable panel to allow removal of gen set for service
• Relocated main breakers to improve storage access
• AIS send and receive feature
• Added backup bilge pump on new circuit breaker
• Added 12V plugs to main cabin and cockpit on dedicated breaker

Lines and Rigging

• Jack lines for both sides
• Whisker pole stowed on mast
• Whisker pole control lines and separate jib sheets
• Boom jibe preventer lines and block
• Offshore inflatable life jackets with built-in harness
• Changed manual jib sheet cars to line adjustable cars
• Custom built heavy-duty davits for dinghy and set up for solar panels
• Outboard motor hoist incorporated into Bimini structure. Block and tackle rigging.
• Spinnaker halyard
• Halyard added for whisker pole control
• Seldon spinnaker/gennaker bow pole
• Added 65 lb Mantis anchor
• Replaced standard anchor rode with 300 ft chain
• Added Mantis anchor bridle
• Spare set of dock lines included - qty 7

Cabin

• (3) 12V fans
• Seagull drinking water filter
• Upgrade to the freezer to hold temp 9-12 degrees
• Power strips for 110V plugs
• Small inverter for charging phones, etc
• Converted hanging closet to pantry in rear cabin
• Added numerous hooks, towel bars
• Second propane tank for the stove in the propane locker
• Teak floor grates in heads

The Catalina 445 features one of the most versatile and comfortable interior layouts afloat. She is ideally suited as a live-a-board or for cruising on epic adventures with family and friends.

One of the most innovative and unique features of the interior is the multifunctional third stateroom. This air-conditioned area can easily be converted into a double berth or utilized as an upper and lower berth. When not needed for guests, it can be converted to a storage compartment/workbench with additional access from a hatch in the cockpit.

The warm and inviting owner's stateroom is forward with a centerline double berth that has an electric motor to raise the head of the bed up for reading or watching TV. A vanity is located to the port and a hanging locker to starboard with additional storage under the berth. The large owner's ensuite head has a separate shower stall and is well-ventilated.

The large open main salon has a large U-shaped dining table that folds into itself to form a cocktail table or lowers to form a double berth. The starboard settee can be converted into two side seats with a small table between them, which is ideal for playing games or for holding snacks and drinks during "happy hour". Abundant light enters the main salon through the numerous opening hatches and fixed ports in the deck and hull.

The forward-facing navigation station is to starboard with the AC/DC electrical panels located outboard. Next aft is the double door, guest head with access from either the main salon or aft guest cabin.

The starboard guest stateroom features a double berth angled for easier access and standing headroom.

The overall accommodations plan gets the nod for comfort and construction quality, but the port aft cabin "flex space" has been particularly well received. It can be configured as a guest cabin, a workshop, a big stowage area, or anything in between. There is a wonderful double berth that folds up to give a walkway and an upper berth that folds up also..

The spacious, L-shaped galley has the storage and features needed for extended cruising. Special attention is paid to storage, such as the pantry with vinyl coated wire racks and special lockers for canned goods, bottles, dishes and cookware. This boat is outfitted with an additional freezer unit located in the top loading insulated compartment. More details include:

• Front Loading Refrigeration, DC Powered with freezer compartment
• Separate Top Loading Refrigeration /Freezer that has been upgraded to very efficient freezing with premium insulation.
• Polished Double Stainless steel sinks
• Single Lever Faucet with Pull-out sprayer
• Large Storage Cabinets over the galley
• Large Storage Lockers w/Drawers &Bins
• Gimbaled, Stainless Steel, 3-Burner LPG Stove w/Oven, Oven Hood, Light & Vent
• Multi-Drawer Bank with Utensil Storage Rack
• Microwave Oven, AC Powered

• Smart Pilot ST-6002 Type 2 Linear Drive with X-30 Core pack Starboard Side
• Raymarine ST-60 Wind Package Port Side
• Raymarine ST-60 Tri-Data Port Side
• I 70 Multi-function Display Starboard Side
• 24" HD 4 kW Digital Radome Mast-Mounted
• 12.1" Color Radar/Chartplotter: Raymarine E120W Multifunction Touchscreen
• Raymarine DSC VHF Radio w/ Command mic in Cockpit
• Raymarine AIS500 Class B Transceiver

• In-Mast Furling Mainsail
• 139% Genoa - New in 2019
• Spare 135% Genoa, with U.V. Protection, White -Included
• Complete Standing and Running Rigging
• Internal Pre-Stretched Dacron Halyards
• PVC Wiring Conduit with Messenger in Mast
• Mast-Mount, Adjustable Whisker Pole
• Selden Bow Pole for Spinnaker

The 445's hull is optimized to provide the gentle, predictable motion underway, which is so appreciated in other Catalina models. The deck is strikingly handsome with a low profile cabin structure, twin helm stations and a roomy cockpit with tall, secure comfortable coamings and a cockpit table that seats 4-6 persons. The deck is finished with a traditional diamond-patterned non-skid surface. Additional features:

• Electro-polished Maxwell VW1500 Electric Anchor Windlass w/Power Up and Down Foot Switches
• Large Divided Anchor Locker for Below Deck Chain and Rode Storage
• Stern Rails with Observation Seats, Cup Holders and Outboard Bracket
• LPG Storage Locker for (2) Tanks
• Hot & Cold Shower Mounted in Transom Boarding Area
• Water-Tight Strike Zone Collision Bulkhead at Bow

Keel

Keel Type: Wing

Ballast: 8200 lb

Displacement: 24500 sq ft

Max Draft: 5.00 ft

Sail Area

I : 53.50 ft

J : 15.58 ft

P : 51.50 ft

E : 17.00 ft

• Five-part Construction with dedicated fiberglass sub-sole grid - Provides the backbone of a ruggedly built boat that stands up to the test of time
• StrikeZone™- Featuring a watertight collision bulkhead forward and high density foam below the water line
• Deep Defense Rudder System™- Superior construction with a stainless steel welded structure glassed to the rudder blade and off center seam for impact resistance
• T Beam Mast Step™- Combines the benefits of a deck stepped mast and the strength of a keel stepped mast
• SecureSocket Mast Support™- Heavy duty, stainless steel chainplate system that facilitates perfect load resolution and watertight integrity
• Lead Keels- Absorbs impact for safety and requires less maintenance than cast iron or other keel materials
• Knitted Fiberglass Fabrics- Creates a stronger laminate without additional weight
• Internal Flange Hull to Deck Joint- Capped with a slotted toe rail and provides superior impact resistance
• Low Profile Deck Cabin Design- Sleek appearance and low windage; durable diamond non-skid pattern adds an element of safety
• Wide Weather Decks- Allows effortless movement forward
• Oversized Traveler and Winches- Ease of sail handling in all conditions
• Solid Teak Interiors and Laminates- Hand finished with satin and high gloss varnish, easy to repair or refinish
• Plush Innerspring Mattresses- Standard on all 5 Series models
• Filter Locker- Raw water filter, fuel/water separator and coolant reservoir in dedicated locker for easy daily access
• Newly Designed Navigation Panel- Consistent design on all 5 Series models; has additional circuits for additional options
• Built In Amp Draw Digital Meter- Helps monitor electrical usage

There are five main components: Hull, structural grid, hull liner, deck and molded deck liner, with a collision bulkhead forward. The grid catches the load of keel, mast and tankage. Like the liners (which also make a structural contribution), the grid has "chases" for clean runs and updates of electrical wiring. The fiberglass hull is cored from the waterline up with balsa. The deck is also balsa-cored except where winches and other gear are mounted. Furniture sub assemblies are not structural, Douglas says, "so that everything ends up in the right place." The company is sticking with lead, not iron, for its keels, which is one reason why Catalina's price point is a bit north of other manufacturers.