Next Generation Yachting

Next Generation Yachting

2006 Nautor Swan 100

  • 100 ft
  • Racer and Cruiser
  • Palma de Mallorca, ES

Offered for



Hoppetosse is a superyacht and masterpiece built by Nautor's Swan and launched in 2006. She combines the performance of a racing yacht with world-class comfort and opulence. The Swan 100 FD's deck lines give the yacht a very impressive sleek and racing oriented look. German Frers timeless lines allow an uncluttered and efficient deck layout, perfect for short-handed sailing and equally efficient for fully crewed racing.

Hoppetosse has been maintained to an exceptionally high level and has benefitted from an open check-book budget where systems and equipment have constantly been upgraded and improved to keep this superyacht looking and working better then new.

She accommodates 7 guests in 3 cabins plus 4 crew.


  • Manufacturer
    Nautor Swan
  • Model
  • Year
  • LOA
    100 ft - 30.48 meter
  • Beam
    23 ft 11 in - 7.29 meter
  • Draft - max
    18 ft - 5.49 meter
  • Engine Brand
  • Number of Rooms
  • Category
  • Condition
  • Location
    Palma de Mallorca, ES
  • Vessel Name
  • Boat Type
    Racer and Cruiser
  • Hull Material
  • Designer:
    German Frers
  • Available for sale in U.S. waters
  • Length
    100 ft - 30.48 meter
  • LOA:
    100 ft - 30.48 meter
  • Beam:
    23 ft 11 in - 7.29 meter
  • Draft - max:
    18 ft - 5.49 meter
  • Make:
  • Model:
    Sabre M300Ti 300Hp
  • Engine(s):
  • Cruise Speed:
    12 MPH
  • Joystick Control:
  • Engine Type:
  • Fuel Type:
  • Horsepower:
    221 (Individual), 221 (combined)
  • Max Speed:
    23 MPH
  • Fuel Tank:
    4000 gallons - 1 tank(s)
  • Fresh Water Tank:
    1500 gallons - 1 tank(s)
  • Total Cabins:
  • Total Berths:
  • Total Heads:
  • Captains Cabin:

Hoppetosse is a superyacht and masterpiece built by Nautor's Swan and launched in 2006. She combines the performance of a racing yacht with world-class comfort and opulence. The Swan 100 FD's deck lines give the yacht a very impressive sleek and racing oriented look.


The cockpit concept features two spacious L-shaped sofas with large cockpit tables on either side of the centre-line companionway. In addition the helmsman seats are extended aft to form another seating area on the aft deck. The coaming continues aft of the L-shaped helmsman seats awarding a sleek and elegant profile.


Hoppetosse has been maintained to an exceptionally high level and has benefitted from an open check-book budget where systems and equipment have constantly been upgraded and improved to keep this superyacht looking and working better then new.


Hull Construction


The hull is of single skin construction built in a female mould using glass/aramid hybrid fibre reinforced vinylester laminate with local carbon fibre reinforcements. A high proportion of the fibres are unidirectional, giving a stiff laminate with excellent strength and fatigue properties. Structural bulkheads are of Nomex honeycomb cored carbon fibre epoxy pre-preg construction and laminated to hull and deck. Stiffener flanges are unidirectional carbon fibre lay-ups over GRP shells.

Fresh antifouling in 2020.

4x underwater lights aft of rudder


Hull Finish

Exterior finish in Anthracite grey Awlgrip paint, newly painted in 2016



Hydraulically operated lifting keel mechanism regulating draft from 5.5m with keel down to 3.3m with keel up.

T-Bulb keel with access to lifting mechanism via hinged lockers on deck.

Complete service of keel lifting system and replacement of hydraulic cylinders in 2016


Rudder & Steering System

Sprocket and chain steering gear sheaves provided with guards to prevent jamming. Lightweight aluminium steering quadrant bolted to rudder stock. Two 47" (1.20 m) destroyer type composite wheels. Rudder removed and serviced in 2016.

New lower bearing 2021 - Advanced Hydraulics Palma

New cutlass bearings 2020


Dinghy Garage & Bathing Platform

Storage for a tender in lazarette dinghy garage.

Remote control winch to load tender

Hydraulically operated swim platform with teak laid on top

Hot and cold shower on platform



Hydraulically operated Multiplex carbon passarelle


Lazarettes port & starboard

11Kva night generator installed in port lazarette

Storage for equipment in both sides


Deck Construction

Main deck is of carbon fibre pre-preg sandwich construction with Nomex honeycomb core and glued to the hull. High density core under deck fittings. Coachroof and coamings of glass fibre reinforced vinylester with low density foam core.

Laid teak on side decks, coach roof, coamings and cockpit sole glued and vacuum bagged without screws.

Polished surfaces repainted in light grey Awlgrip paint (2016)


Deck Equipment

Lewmar blocks, tracks and padeyes.

Composite / stainless steel fairleads integrated in bulwark, two forward, four amidships and two aft.

16" retractable mooring cleats, two on fore deck, four amidships, two aft.

Integral toerail with four built in fairleads per side.

Pulpit, pushpit and lifeline stanchions 680 mm high of stainless steel. Spacing conforming to ORC requirements. Stainless lifelines with polished turnbuckles and eyes. Gates in lifelines each side amidships.

Socket for flagpole on aft deck.

Stowage for two eight-man life rafts in deck lockers.

Composite mast collar with Spartite support, custom composite boot painted white.

Stainless fittings to secure safety lines on deck.

Two removable foot supports at helm stations.

Two halyard bails at base of mast.



2 X Lewmar L111 HSTOR sheet winches.

2 X Lewmar L111 HSTOR winches.

4 X Lewmar L88 HSTOR halyard winches near mast.

1 X Lewmar LMS 111 captive mainsheet winch.

1 X Lewmar LMS 111 captive main halyard winch.

1 X Lewmar vertical 5000 hydraulic windlasses.

3 X Sanguinetti retractable 3755000 capstan winches, two aft, and one forward.


Hatches and Windows

Pneumatically powered main companionway sliding hatch of tinted acrylic and vertically sliding door with grey painted finish.

On aft deck two hinged hatches to lazarette and one hatch to dinghy garage.

Hull windows in saloon and owner's cabin

Custom Nautor composite flush hatches

All hinged hatches are supported by gas cylinders (new 2016)


Teak Covered Hatches

• Anchor locker

• Anchor windlass locker

• Gas locker

• Sail Locker

• 2x Lazarette

• Dinghy garage


Perspex Hatches (all new Perspex, gas struts and teak trim in 2016)

• Four in saloon.

• One in each guest cabin

• One in each guest head

• One in navigation area (crew entrance)


Opening Portholes

• One in each crew cabin

• Two in galley

• One in crew mess

One fixed glass prism in crew shower



Lewmar vertical 5000 hydraulic windlasses recessed in fore deck. Controls on a wandering lead with 3.5 m (11') cable. Windlass to have winch handle-controlled friction brake to allow lowering of anchor.

System to allow for stowage of anchor below deck with the use of a hydraulically controlled titanium arm.


Canvas & Deck Upholstery

Dodger recessed in coach roof (new 2017)

Cockpit cushions (new 2016)

Boom awning (new 2017)

Cockpit table cover (new 2016)

Mainsail cover (new 2016)

All berths have canvas lee cloths



All visible surfaces in quarter or straight cut teak finished in hand rubbed satin varnish.

Rounded corners on bulkheads and furniture in radius 65mm

Floorboards are made of lightweight sandwich with light oak veneer on top surface. The floorboards are varnished with urethane varnish and have the same hand rubbed satin finish as the rest of the interior. All floorboards are lying on vibration damping materials and provided with hinges where frequent access to the bilge is required.

Vinyl covered removable overhead panels are installed in all accommodation areas. 


Master Cabin

Large double bed with split mattresses on starboard side. A settee which can be easily converted into single bed on port side. Upper lockers outboard of the bed and settee. Large full length hanging lockers forward.


Master Cabin's Ensuite Head

Corian countertop, cupboards, sink, mirrors and storage lockers separate shower stall with grating on the floor. Tempered glass shower door.


Starboard Guest Cabin

Single berths on either side, upper lockers outboard. Pullman berth above inboard berth. Full-length hanging locker forward. Ensuite head with separate shower compartment.


Port Guest Cabin

Double berth outboard, full-length hanging locker forward. Ensuite head with separate shower compartment.



Light and open, comfortable dining and relaxed seating. U-shaped settee on starboard side. Drawers under settee wings where practical. Full size dining table, which can be laid for 8-10 persons. Two movable chairs on centreline side of dining table. Upper lockers beside hull window. A cabinet for entertainment equipment

on centreline forward. L-shaped settee on port side with adjacent coffee table. Upper lockers beside hull window.     



All bulkheads in teak. Countertop and fiddles in Corian. Front-loading refrigerators 2 x 142 l, front-loading drawer freezers 2x 102 l. Gas stove and oven. Chest of drawers. Two large stainless-steel sinks and a large garbage bin. Upper lockers to be used for glasses and tableware. Lower locker to be used for pots and pans. 


Galley Equipment

Miele extractor hood with external ventilation and lights

Miele 2-burner induction hob

Miele gas stove with four burners

Miele microwave oven

Smeg oven

Waste disposal in sink

U-Line icemaker

Miele dishwasher (2020)

Miele washing machine (2020)

Miele Dryer (2013)

2 X 142 litre refrigerators

1 X freezer 100 litres + 1 X freezer 100 litres under floorboards.

Iceberg drink refrigerator in cockpit


Crew Mess

Bulkheads in teak. Settee seating four with dining table. TV, DVD and stereo system. Alarm panels


Navigation Area

Navigation table on centreline facing forward. Instrument panels above. Chest of drawers and locker for boat manuals on port. Chart storage above desk. Movable navigator seat. Sat comms. Iridium Handheld


Crew Cabin

Single berths with pullman berths above. Two drawers under lower berths. Upper shelves and lockers outboard of pullman berths. Full-length hanging locker. Full-length mirror on cabin door. 


Crew Head

Crew head on in centreline between the two cabins, fitted with mirrors, sink, storage lockers and vacuum head. Separate shower compartment to port.


Fore Peak / Sail Locker

Watertight bulkheads aft.

Bulkheads, floorboards and topsides painted white. Rails that double as footsteps for mooring lines, sheets and halyards, sail storage bins. 


Engine Room Description

Fire resistance meets SOLAS B-15 requirements.

Propeller area sound insulated.

Engine room internally sound insulated.

Drip trays under engine and generator are connected to electric waste oil drain pump.

New alternator (2018)

New starter motor in spares

New exhaust elbows

New salt water pump


Main Engine

1 X Marine diesel engine, Perkins Sabre M300Ti 6 cylinder, output 221 kW at 2500 rpm. (completely rebuilt in 2016, new engine mounts) Marine gear 2.5:1 gearbox (new 2016).

Flexible couplings between engine and gearbox and flexible mountings.  


Propeller & Stern gear

3-blade Hundested variable pitch propeller, diameter 850mm

Drip free shaft seal replaced in 2015

Water lubricated rubber bearings at bracket and stern tube and flexible shaft coupling.

New cutlass bearings (2020)


Exhaust System

Halyard wet exhaust with GRP silencers and gas/water seperators.

Silencers have drain taps.

Silencers supported on flexible mountings.



Main Generator: Northern Lights Lugger 33Kw with big PTO. (6.821 hrs June 2021)

Service Generator: Panda 9Kw to 25Kw (new 2020). 53 hrs June 2021


Fuel System

4 X s/s tanks for total 4000 litres, fuel tanks cleaned in 2016

Racor fuel/air separator.

Fuel supply lines have dual Racor fuel filter/water separators. Single Racor fuel filter/water separator on the generator supply line.


Lubricating System

1 X 40 litre oil tank.

1 X 40 litre oil waste tank.


Hydraulic System

The hydraulic system is a Bosch-Rexroth custom designed system to supply all hydraulic functions quietly and smoothly, eliminating any inherent hydraulic noise. The alternative power sources are installed to meet the demands of the sail handling equipment. Central hydraulic system is PLC controlled.

The hydraulic system is defined on a basis of a central power pack supplying regionally located valve groups, thereby achieving minimal weight to power ratio with the effect of using minimum electrical power with maximum hydraulic movement. Each control valve group is situated close to the operating unit, giving a precise control and allows for a quiet and smooth operation, eliminating inherent hydraulic noise and vibration. The system has three different sources of power. Each source will be operated independently of each other.                                                                                   


The sources are obtained from:

1. Generator PTO pump - fully reconditioned in 2016

2. Main engine PTO pump - fully reconditioned in 2016

3. DC powerpack system using two electrically powered hydraulic pumps.   


Hydraulic Functions

- Anchor windlass

- Lifting keel and lock

- 3x Sanguinetti capstan

- Jib furler

- Anchor swing arm

- Bow thruster plus up/down

- Outhaul

- Jib halyard tensioner

- Backstay tensioner

- Main halyard captive winch

- Main sheet captive winch

- Boom vang

- Transom hatch cylinders

- All drum winches

- Cunningham

- Tender winch in lazarette



There are two pneumatic compressors with quick acting couplings in lazarette for transom door seal, companionway hatch and washboard.



Maxpower retractable: 430/34, 30 kW


Noise and Vibration

Every effort has been made to minimize noise and vibration

All engines, pumps, fans, exhaust pipes, hydraulic elements and compressors are flexible mounted.


Plumbing Systems

3x stainless steel tanks with combined capacity of 1500 litres

Wilo freshwater circulation pump with pressure tank.

All piping is colour coded.

Additional Reya backup freshwater pump.

Deck-shower in dinghy garage.

2x Jaspi 120 litre hot-water tanks.

Shore supply connection with Idromar active carbon filter.

SE-water pump for fire/anchor-wash, with connection on fore-deck and amidships + fire hoses.

2x 6kg gas bottles in drained locker



1x Spectra Farfallon watermaker producing 400 litres per hour


Ventilation System

Condaria climate control system with independent fancoils in each cabin

Forced ventilation in all cabins.

Exhaust ventilators in galley and bathrooms.

Battery boxes have extractor fan to outside.


Drainage System

2x grey water tanks fore and aft

4x Maxi submersible bilge pumps

2x manual Whale Titan bilge pumps

All marine heads Tecma Standard Plus 24V with fresh-water flush

2x Blackwater tanks drained by Gianneschi pumps (new 2016)



- Bauer Dive compressor

- 3 x tanks

- 2 x BCD

Serviced 2020


DC System

Service batteries split into 2 banks, each with capacity of 24V 1000 Ah/10 h.

Each bank with 12 units of 2V each. New service batteries fitted in 2020

Starting batteries 24V 50Ah Ah/20 for engine and generator. 

Separate battery 12V 50 Ah/20 h battery for the night generator in the lazarette.


AC System

230V 50HZ single phase 3-wire system. Supplied by shore-power, generator, or inverter.

Power shedding system, PLC controlled.

1x Northern Lights MPP 445D 33 kVA in engine room 6,100 hours in February 2017

Vetek VSPII Frequency converter 20 kVA accepts input 180-520 V AC, 47 to 64 HZ, installed in engine room.                                             



2x Bosch 28V 140 A alternators on main engine for service battery charging.

1x 60 A alternator on main engine for main engine start battery

Generators have their own alternators for their starting batteries, serviced 2019.

4x Mastervolt Mass 24V 100 A chargers for service batteries

1x Mastervolt Mass 24V 25 A for start batteries

Inverter Mastervolt 24/5000 VA

Inverter Mastervolt 24/1500 VA Sine wave, for entertainment systems


Sailing Instruments

B&G H5000 system installed in 2015


Digital displays

- GFD at nav station/both helms/crew mess/saloon bulkhead and owner's cabin

- 4 X 40/40 displays on mast bracket below gooseneck

- 4 X 20/20 repeaters at companion way.

- GFDs also show rig pressures, and lifting keel position.

- 2x B&G analogue 360 degree wind direction.

- 2x B&G analogue 45 degree magnified wind direction.


Navigation Instruments

3 x Raymarine Chartplotter and radar system with interactive displays at nav station and port and starboard helm.

MaxSea chartplotting software.


Segatron Meridian, fully serviced in 2016

Main control at nav station.

Control panel on starboard helm.

Hydraulic back-up from main hydraulic system.


Computer Systems

2x PC with Sony 15" screens at navstation


Communication Systems

VHF radio Raymarine with 2 handsets

McMurdo GMDSS Navtex

2x VHF handheld.

R&R Electronic Delta Pacific active TV antenna


Entertainment Systems

Saloon: Bose Lifestyle 50 tuner/CD changer plus 5 surround sound speakers. Metronic DVB player, DVD player. Sony 42" flat screen TV on a lift port-side.

Crew mess: Bose entertainment system, Sony TV.

Port & Starboard Guest cabins: Bose entertainment system, Sony TV.

Master cabin: Bose SA-1 amplifier. 2xBose speakers. Sharp flat screen TV. Sony DVD player.

Cockpit: Bose speakers



Four spreader rig with discontinuous shrouds by Offshore Spars. Faired and painted black.

Spreaders swept back 25 degrees.

I= 40.00m

J= 10.70m



Fore triangle 214 m²

Main sail 240 m²

110% Jib 237.7 m²

Asym Spinnaker 797 m



Carbon fibre Intermediate modulus with luff track for mainsail.

Masthead is moulded carbon-fibre until integral to mast.

Internal wiring protected in PVC tubes.

Ventilation conduits

Carbon fibre spreaders.

Four down lights on lower spreaders.

One pair up light on each spreader.

PVC mast boot, sealed.

Trysail track.

Custom radar & horn bracket.


Standing Rigging

Navtec rod, all replaced in 2016

Running backstays are aramid cable.

Main shroud rigging screws of barrel pin types.

Head stay and inner forestay have toggles at upper & lower end.



Carbon fibre standard modulus black painted Park Avenue boom with lazy-jacks. Hydraulic outhaul system. two reefs in main. Built in deck lights. Boom preventer system.

Rig Hydraulics (All serviced 2021)

Reckmann hydraulic furling head stay and inner forestay with carbon foils

Navtec boom vang.

Navtec jib halyard tensioner.

Mainsail outhaul.

Navtec split backstay.

Mast Cunningham.

Inner forestay tensioner.

Nautor made furler for Code-O installed in bow.


Running Rigging

All running rigging replaced in 2016, inventory available on request.

Main halyard & sheet replaced 2021

Mast Jack

Hydraulic mast jack with spacer and removable manual pump.


Anchoring and Mooring

CQR 180 lbs anchor on hydraulic launching arm.

Fortress FX-80 kedge anchor.

100m X 14mm high tensile chain.

100m X 25mm plaited nylon anchor line.

Assorted fenders

Anchor light with cable and plug.


Safety Equipment

Throwing line mounted on stern pulpit.

Jackstays for deck.

McMurdo EPIRB Cospas/Sarsat distress EPIRB.

McMurdo RT9 SART radar transponder.

3x 8-man AVON Modula 8 Super vacuum packed liferafts.


Fire Extinguishers

Sea-fire extinguishing system for E/R.

Heat detectors in E/R galley, lazarette and forepeak

Hand extinguishers Gloria P2G for each cabin.

Fire blanket in galley



Mainsail 2016 (Evolution). Full batten, black taffeta

New BattensTrysails 2006 (North)



Furling Genoa 2016 (Evolution) Black taffeta

Furling Staysail 2016 (Evolution) Black taffeta



Code Zero 2010 (Doyle). Top down furler


Recent improvements include:


2015 /2016

All new B&G H5000 Sailing Instruments (2015)

New Raymarine radar/Chartplotter system with displays at helm and nav station (2015)

New lightening (2015/2016)

Hull repainted in anthracite grey with silver cove stripe and black boot top stripes

Carbon surfaces on deck repainted in light grey (2016)

Complete rebuiliding of main propulsion engine and replacement of gearbox (2016)

Complete strip and service of mast including new standing rigging and repainting of mast and boom in black, (2016)

addition of new custom radar antenna mounting offering a clean and minimalist look (2016)

Rudder removed and bearing serviced (2016)

New set of Evolution sails - Main, Jib, Staysail (2016)

New Navtex, AIS and VHF radio systems (2016)

New cushions and covers (2016)

All hatches refurbished with new teak trim, new plexiglass and gas struts (2016)

New consoles and control panels on deck (2016/2017)

Hydraulics - Recondition engine and generator PTO and all cylinders serviced in 2016/2017

New refrigeration and freezer compressors (2016)



New alternator 2018

New starter motor in spares 2018

New exhaust elbows 2018

New salt water pump 2018



Major lifting keel service including 3x new hydraulic cylinders and top plate (2019)

Generator starter batteries serviced 2019



New Miele washing machine and dishwasher 2020

New cutlass bearings 2020

New service batteries 2020

New rudder bearing 2020

New Raymarine

New hydraulic pressure lines 2020

New Panda service generator 9Kw-25Kw (53 hrs June 2021)

Dive compressor serviced 2020



New lower bearing 2021 - Advanced Hydraulics Palma.

All rig hydraulics serviced 2021

Main halyard and sheet replaced 2021

New plotters 2021


Specifications and details of this vessel are provided in good faith for informational purposes only. Data regarding the specifications, operating characteristics and condition of the vessel was obtained from sources believed reliable but is not guaranteed by owner or brokers. Buyer assumes responsibility to verify all speeds, capacities, consumptions and other measurements contained herein and otherwise provided and agrees to instruct his agent or surveyor to confirm such details prior to purchase. Vessel is offered subject to prior sale, price and inventory changes and withdrawal from market without notice.


Engine hours are as of the date of the original listing and are a representation of what the listing broker has been told by the owner and/or actual reading of the engine hour meters. The broker cannot and does not guarantee the true hours. It is the responsibility of the purchaser to verify engine hours, warranties implied or otherwise, and major overhauls as well as all other representations noted on the listing brochure.

Next Generation Yachting operates as a Buyer Agent and is not the Listing Agent for the above yacht displayed on our Multiple Listings Search (MLS) system. Our aim is to provide a comprehensive and easy to use yacht listings database as a service to assist potential buyers in their purchasing process, without conveying representation of such listing. Our team's Buyer Agents services are readily available to you, should you require assistance with your purchase. Our expertise includes previewing yachts, preparing offers, organizing surveys and sea trials, and providing assistance with the closing process and beyond. If you would like to learn more about our free Buyer Agent Services, please click here.


Need more information? Please contact our Nautor Swan Yachts expert


Our Services

Buying a Yacht



Learn more
Sell your Yacht



Learn more




Similar Yachts For Sale

  • Based on price range and size you may be interested in these yachts as well! The following options are a sample of additional choices and if you would like to see more similar yachts please click below.

    View All


Contact Us

Contact Details

Next Generation Yachting

1815 Purdy Ave
Miami Beach, FL 33139

+1 786.246.9873


Online Inquiry

Close Success

Thank You

If you would like to improve your browsing experience and save your preferences, sign up or log in to your account.